Adding item to the basket... 
If we were to use one word to describe these shoulder rigs it would be balance! You cannot shoot with a rig that is not balanced, you’ll be fighting fatigue on long shoots. Whether you’re shooting TV, film, documentaries, weddings or news, a balanced shoulder mounted rig will keep your shots steady and allow you to shoot the whole day.
The Zacuto Rig for Canon EOS C100 MK II includes the VCT Pro baseplate which will help you balance your rig. The Zgrip Zwivel fully articulating handgrip gets your hand in the most comfortable position. Wrapping around the side and top of the rig is the Halfcage Rail and Recoil Handle, and the grip relocator lets you move the control grip out front for increased stability and accessibility.
The Zacuto Rig for Canon EOS C100 MK II is made up of the following items:
• Zacuto VCT Pro Baseplate
• Zacuto Half Cage Rail
• Zacuto Axis Mini
• Zacuto Zgrip Z-Mount Zwivel
• Zacuto Recoil Handle
• Zacuto 3” Z-Rail
• Zacuto Grip Handle with Grip Relocator
| Description | Quantity |
|---|---|
| 3" Z-Rail | 1 |
| - 1/4 Screw | 2 |
| Half Cage | 1 |
| - Allen Key | 1 |
| - Large Red Thumb Screw | 2 |
| - Allen Key Screws (attached) | 14 |
| - 5" Z-Rail | 1 |
| - 2 Screws (on Z-Rail) | 2 |
| - Wooden Handle | 1 |
| - Rail grip (attached to handle via Allen bolts) | 1 |
| - Long rail section (attached to handle via Allen bolts) | 1 |
| Axis Mini | 1 |
| - Small Red Thumb Screw / Small Red Thumbs Screw x 2 | 3 |
| - Paperwork | 1 |
| - 3 inch rod (for linking to Zacuto rigs) and attaching hex bolt | 1 |
| - Black thumb screw | 1 |
| - Supplement section (for attaching rod mounted viewfinders). | 1 |
| Zgrip Z-Mount Zwivel | 1 |
| - Small Red Thumb Screw / Small Red Thumbs Screw x 2 | 3 |
| - 15mm Rod Mount Bracket | 2 |
| - Handle with 6 Screws | 1 |
| - 4.5 Inch Rod with Ball Mount | 1 |
| Recoil Handle | 1 |
| - Small Red Thumb Screw / Small Red Thumbs Screw x 2 | 4 |
| - Cold Shoe Accessory Jaws | 1 |
| - Z-Rail Jaws | 1 |
| - Allen Bolts | 12 |
| - Cross Head Screws | 2 |
| C200 Zgrip Trigger | 1 |
| - Large Red Thumb Screw | 2 |
| - Lanc Extension Cable | 1 |
| - Black thumb screw | 1 |
| VCT Pro Baseplate | 1 |
| - Allen Key | 1 |
| - Small Red Thumb Screw / Small Red Thumbs Screw x 2 | 1 |
| - Large Red Thumb Screw | 2 |
| - 1/4 Screw | 1 |
| - 3/4 screw | 1 |
| - USB Drive (Containing Manual) | 1 |
| - Allen Key Screws (attached) | 7 |
| - Sliding Red Plate (Quick Release) | 1 |
| - 15mm Rod | 2 |
| - VCT Wedge Tail (with 2 cross head screws) | 1 |
| - Tail Hook (with 4 cross head screws) | 1 |
| - Washer | 5 |
| - Cross head screws to main unit (under slip plate) | 3 |
| - Side mounting bracket (with 3 connecting screws) | 1 |
Viewfinder / monitor not included.
Takes 15mm rods/rails.
Not compatible with C300 II.
© 2003-2024 Hireacamera.com - all rights reserved
