Monitor your footage on location with the Sumo 19SE Director's Package. Includes Atomos SumoSE monitor/recorder and Teradek Bolt 500 XT SDI/HDMI Wireless TX.
Proven & reliable.
With a bright (1200nit), HDR touchscreen covering the DCI-P3 (P3) colour gamut, the ability to record Apple ProResRAW up to 6Kp30, and a rugged and versatile design, the SUMO 19SE is the perfect addition to an on-set video village. With four independent inputs it can also be used to switch and record each ISO stream up to 1080p60 and has full-sized XLR connectors for professional audio workflows.
Record up to 6Kp30 ProRes RAW
Unlock the true potential of SDI RAW cinema cameras with the Sumo 19SE. Preserve the pristine quality of the data from the camera sensor by recording in Apple ProRes RAW at up to 6Kp30, 4Kp60 DCI/UHD, and 2Kp240 DCI/HD, or record in CinemaDNG at up to 4Kp30 DCI. Sumo 19SE is compatible with the Sony FS series cameras, Canon C300MKII/C500, Panasonic EVA-1/Varicam LT, and more.
10-bit ProRes and DNx up to 4Kp60
Video from any camera or digital video source can be captured via SDI or HDMI. Record up to 10-bit 4:2:2 in Apple ProRes or Avid DNxHR codecs at 4Kp60. With support for multiple inputs via SDI, the SUMO 19SE provides the ability to record up to 4 x inputs and also supports ProRes LT and DNxHD 36 for extended recording times.
High-bright & HDR monitoring
With 1200nit brightness, 19-inch, 1920 x 1080, and 10-bit processing all built into a rugged enclosure, the SUMO 19SE is at home in any location. SDI and HDMI i/o supports a wide range of inputs and provides signal cross conversion with 4K>HD down conversion options.
Live Quad-channel HD switching & recording
Record up to four 1080p60 streams simultaneously (via 3G SDI Level A Only) as separate ISOs, as well as a fifth “program” channel of your switched feed, whilst cueing and switching in real-time. Display the resulting mixed output (via HDMI or SDI) live on set or use an HDMI to USB capture device to output the switched feed for live streaming. Switching is asynchronous, eliminating the need for expensive locked sources and allowing the use of more affordable cameras that do not support timecode/genlock inputs.
Two stereo balanced XLR inputs with 48V
The full-size XLR connectors with 48V phantom power allow you to connect two external microphones with balanced analogue audio recording and monitoring. The SUMO 19SE also has dedicated meters, gain controls, and adjustments for frame delay on each channel. Mic or line-level audio can be seamlessly synchronised with embedded audio from HDMI and SDI sources.
The Bolt XT satisfies the needs of the most discerning professionals, from powerful software tools and rock-solid performance to smart power options and backward compatibility.
A key feature of the Bolt XT is its backward compatibility with any Bolt of the same range, Sidekick II / LT / XT, and 703 Bolt, giving users more flexibility building onto their existing systems or linking with others already on set. Unlike alternative wireless video systems, Bolt XT includes a unique AES 128 encryption algorithm to protect your video footage, ensuring that only authorized receivers can connect to the transmitter.
Each transmitter includes an HDMI, 3G-SDI and looping 3G-SDI output. Receivers feature an HDMI output as well as dual 3G-SDI outputs. While wireless performance is critical on set, so are practical mounting options that ensure optimal performance and a quick set-up. With the Bolt XT line, Teradek has added an integrated NATO rail on the receiver and several 1/4”-20 and 3/8” mounting points on the transmitter to greatly improve available mounting options.
An all-new aluminium chassis further reduces the size and weight of the Bolt line, with receivers also allowing for integrated pass-through power. Teradek has also replaced the internal antennas on the Bolt 500 XT transmitter with an external set to enhance wireless performance when operating in environments with large obstacles or heavy interference.
The Bolt XT, like the previous generation, is multicast capable up to 4 receivers (1 is included) and includes built-in cross conversion and Teradek’s proprietary software utilities, including a manual frequency-selection tool, 3D LUT engine, and a 5GHz spectrum analyser to keep an eye on interference in your area.
Description | Quantity |
---|---|
Manfrotto Avenger C-Stand 30 with grip head | 1 |
- Galeforce Cases iM3300 Black Case | 1 |
- Manfrotto Centre shaft with 3 extension sections | 1 |
- Manfrotto Base with 3 foldable legs | 1 |
- Manfrotto Slim boom arm with D520 mount at one end | 1 |
- Manfrotto Removable D200 Mount for the boom arm | 1 |
- Manfrotto Blue feet on stand | 3 |
- Manfrotto Large silver/black thumb turn | 4 |
- Manfrotto D01017 Clamp section | 2 |
- Manfrotto D01018 Clamp Section | 2 |
- Manfrotto Cork Spacer | 2 |
- Manfrotto Small washers / spacers for clamps | 8 |
- Manfrotto Rubber washers (in place on the central shaft) | 3 |
- Manfrotto Bolt with large blue/black thumb turn | 2 |
Atomos Sumo Sunhood | 1 |
- Atomos Screw | 6 |
Swit 2 x V-Lok + Twin Charger Kit | 1 |
- Swit 95Wh V-Lok Battery Pack | 2 |
- Swit Twin sequential V-Lok Charger | 1 |
- Swit Kettle Lead | 1 |
Teradek Bolt 500 XT SDI/HDMI Wireless TX + Batteries | 1 |
- Canon LC-E6E Battery Charger (For LP-E6 type) | 1 |
- Generic Mains Lead (for Battery Charger) | 1 |
- Canon LC-E6E Battery Charger | 1 |
- Teradek Bolt 500 XT SDI/HDMI Wireless TX | 1 |
- Generic USB cable | 2 |
- Generic Allen Key | 1 |
- Hireacamera USB Drive (Containing Manual) | 1 |
- Teradek Receiver unit | 1 |
- Teradek Transmitter unit | 1 |
- Teradek Mains power to leno cable (with removable UK plug connection) | 1 |
- Teradek D-Tap to leno power supply | 2 |
- Generic 30cm HDMI cable | 2 |
- Generic 30cm SDI cable | 2 |
- Teradek Removable antennas | 2 |
- Teradek Static cold shoe mount (complete with shoe bolt and 2 securing rings) | 1 |
- Teradek Light stand mount (complete with 1 x bolt and 1 x thumb screw) | 1 |
- Teradek Flight case | 1 |
- Teradek Leno to DC power cable (for battery plate) | 2 |
- Teradek Battery plate with 4 attaching bolts (in place on transmitter / receiver) | 2 |
- Canon LP-E6NH Battery | 4 |
Shape Swivel Monitor Mount For Atomos Sumo | 1 |
- Hireacamera USB Drive (Containing Manual) | 1 |
- Ronford Baker Hard Case with Fastening Clip | 1 |
- Shape Main swivel bracket (with 9 silver structural bolts) | 1 |
- Shape C-Stand clamp fixing with 2 silver bolts + 1 red thumb screw (in position at base of main unit) | 1 |
- Shape Swivel rod bracket (with small grub screw) | 1 |
- Shape Red push button bracket (with 3 structural bolts) | 1 |
- Shape Circular fastening handle (3 washers within - PLEASE DO NOT OPEN / FULLY UNFASTEN) | 1 |
- Shape 3/16 Allen key | 1 |
- Shape 3mm Allen Key | 1 |
- Shape 2.5mm Allen Key | 1 |
- Shape Silver hex bolts (loose in bag) | 4 |
Atomos Sumo 19SE | 1 |
- Peli 1600 Black Flight Case | 1 |
- Generic Mains Lead (Kettle) | 1 |
- Hireacamera USB Drive (Containing Manual) | 1 |
- Atomos Top Handle with 4 Screws | 1 |
- Atomos Batwing V-Lok Adaptor Plate with 4 Securing Screws | 1 |
- Atomos V-Mount Plate with 6 Securing Screws | 2 |
- Atomos Coiled D-Tap Power Cable for V-Mount | 2 |
- Atomos Screw on Stand Leg with rubber Foot | 1 |
- Atomos AC Adaptor | 1 |
- Atomos Feet with Rubber Ball | 2 |
- Atomos Hex Screw (on feet) | 4 |
- Atomos XLR Pin | 2 |
- Angelbird 4K RAW 500 GB ECO Drive | 1 |
- Sabrent USB 3.0 SSD Reader | 1 |
Bright Tangerine Titan Support Arm with 1/4" Thread Reducer | 1 |
- Lowepro MX 30 Case | 1 |
- Bright Tangerine Beige Bag | 1 |
- Generic 3/8 to 1/4 inch adapter screw (brass) | 1 |
The official range for this product as specified by Teradek is 500 feet (approx. 150m). This range is based on perfect conditions i.e. the receiver being in an elevated position, with 100% line of sight. These conditions are rarely achievable in real world situations and we would not advise using this product for distances over 70m. Every time the signal passes through an obstruction e.g. a wall, vehicle, person. etc – the signal will be degraded and the overall range will be reduced.
Bolt is a point to point zero delay transmitter that utilizes RF over the 5GHz spectrum. It cannot stream to iPads, over IP networks or to the Internet.